18/04/2018 9:30
I've got Comcast broadband. I've had Red Hat 9.0 up and running on thenetwork just fine. However after removing a router that was no longer beingused I can't get to the network for some reason. I also have a telephoneadapter for VOIP connected to the cable before the cable modem. It had beenworking fine with the telephone adapter previously.
When booting I get the following message: bringing up interface eth0determining IP information for eth0...failed ./ifup: line 341: 2002 floati.... read more

3 answersclick here to view

17/04/2018 15:30
I would like to try gnucash, but after installing from suse 9.3 cds, and starting using the commmandgnucask from user command line, the display is only using really small fonts.
I usually use kde, and it looks as if gnucash is basically gnome (?). It seems to run anyway. But how might I change the display font size please? tia

2 answersclick here to view

17/04/2018 9:30
Hi, How do I set up a mail server ? Just installed SLES9 from the LTR Kit but need advice on setting up a mailserver.
Tried from YaST but get Error MSG that I have to configure LDAP, I don'tknow where to start.
Basically what I want is my server to collect mail from 2 ISPs, then sendthe mail too ( after it's been checked and spam filtered ) the respectedrecipients on the Home NW. The spouse will be using Outlook for the timebeing while I moving to Sylpheed for mail and news on 9.1 pro..... read more

3 answersclick here to view

16/04/2018 9:30
i'm running rh9 and having problems with my linksys wpc11 v.3 wireless card. at first i could connect to the internet, but the connection would drop out periodically. then i installed a wlan package, and after i did that i couldn't connect to the internet at all. so, i deleted the wlan directory, and now when i try to activate the card i'm getting an error message about orinoco_cs being missing or something. yes, i am a newb. i would really appreciate any help!

2 answersclick here to view

15/04/2018 15:30
Hi all, I'm struggling with a route I'm trying to install on a workstation(Linux 2.4.22, but I think this is common to other OSes as well).
Assume that the workstation (WS1) sits on network 10.1.1.0/24 and thatthere is a gateway (GW1) off this subnet at 10.1.1.1. Also directlyconnected to GW1 is subnet 10.1.2.0/24, and in that subnet sits afirewall (FW1) at 10.1.2.2, with the Internet-at-large the otherside ofit. (Sorry, I don't do ASCII Art, and if you saw my attempts at it,you'.... read more

5 answersclick here to view

15/04/2018 9:30
My neighbor is letting me connect to his Verizon FiOS wireless router whilehe's away. Everything works OK, except outgoing mail.
Attempts to connect to port 25 of 'relay.verizon.net', which is the MX forverizon.net, causes the mail server to close the connection with themessage: 571 Email from 71.175.54.72 is currently blocked by Verizon Online'santi-spam system. The email sender or Email Service Provider may visithttp://www.verizon.net/whitelist and request removal of the bloc.... read more

4 answersclick here to view

14/04/2018 15:30
Hello.
I built a little wireless router using a Dell GX-260 PC runningDebian Lenny, but I tracked down a few issues to the kernel and acouple of other packages in Lenny, so I decided to upgrade the routerto Squeeze. The bugs are gone, now, but now there is an issue withthe system that wasn't there under Lenny. Specifically, I can't runthe router headless. If I disconnect the monitor and reboot therouter, the system hangs and locks up tight. I believe I see where theproblem o.... read more

3 answersclick here to view

14/04/2018 9:30
As a new user to Suse Linux 9.1, could some one help me to get my iomegainternal 100Mb zip drive to work under linux.
I keep getting the following error message.
could not mount devicemount: can't find /dev/sda in etc/fstab of /etc/mtab

2 answersclick here to view

13/04/2018 15:30
(System details at end of post) Hi all Im looking for a bit of advice on what to try/investigate next. Im attempting to install 12.1 on an oldish PC and continually get partitioning errors when it comes to Perform Installation (error message follows:) As it was originally my sons machine, Im keeping the WinXP partition in case he needs it ever, but attempting to (let the installation) shrink it. Ive googled error 1021 and similar installation woes but found nothing relevant. If I elect.... read more

6 answersclick here to view

13/04/2018 9:30
I have loaded Debian four times, it just locks up the machine when it bootsup when desktop appears.
Thanks Jim

1 answersclick here to view

12/04/2018 15:30
Hello NG,I use iptables. I know how to open for example the HTTP-Port(redhat-config). But how do I open other ports? thank you! Arne

1 answersclick here to view

12/04/2018 9:30
Does anyone knows a study that compares grsecurity patchswith lsm (linux security modules).
With special care with the performece diferences.
Thank's in advance

1 answersclick here to view

11/04/2018 9:30
First of all, this is not targeted at this specific advisory or anyperson writing this advisory. :) Generally, the first little bits of each and every CVE descriptionabove, as well as in other advisories sent out by Debian, is not needed.
Please, remove the It was discovered that part from any templates thatyou may be using. That part is not needed. It is also implied anddoesn't add anything to the advisory.
- Adam

2 answersclick here to view

10/04/2018 15:30
I use a Linux-2.6.9 based monolithic kernel with all of the netfilter modules compiled in. I have set up port forwarding to ensure high ID connection for eMule on some Windows boxes behind the router, and on one of the two boxes it works. However, it appears that the router does not forward traffic to the other box despite using the same iptables rule format for each. I confirmed that no traffic reaches the box by using AnalogX PortBlocker to watch the port and using grc.com's port scanne.... read more

3 answersclick here to view

10/04/2018 9:30
I'm using Firefox v1.0 with Suse 9.2 pro and I must say it is working greatapart from one minor point. When I click on new links they are not openingin tabs but as new windows.
I have been to the Firefox faq and set it up as per their instructions butit still opens new links as new windows. The settings are as follows: -Tabbed browsing: Open links from other applications in: a new tab in the most recent window The following four options in the tabbed browsing section are also checked.
Doe.... read more

2 answersclick here to view

eDiscover
Helpforce eDiscover provides technical articles updated each day
Click the logo to go back to the main page
GNU Linux

Helpforce eDiscover RSS feed contains the latest technical articles in RSSWe have a vast archive of technical informationWe have a vast archive of technical informationLinux is a unix computer operating system assembled under the model of free and open source software. The defining component of any Linux system is the Linux kernel, first released in 1991 by Linus Torvalds. Linux is a leading server operating system and runs in some form on 90% of the world's supercomputers as well as as wide variety of other hardware.

Search eDiscover
  
Categories

Click an icon to go to that category

Helpforce eDiscover contains articles about Microsoft Windows Helpforce eDiscover contains articles about Apple products and MacOS Helpforce eDiscover contains articles about Linux and POSIX operating systems Helpforce eDiscover contains articles about Helpforce Helpforce has a large variety of technical information and articles for you to read Helpforce eDiscover contains articles about databases, MYSQL, SQL Server Oracle Helpforce eDiscover contains articles about Java, JVM and the JRE Helpforce eDiscover contains articles about the QNX operating system Helpforce eDiscover contains articles about Oracle Solaris and Open Solaris Helpforce eDiscover contains articles about RISC OS, Acorn and the BBC Micro Helpforce eDiscover contains articles about Amiga and AmigaOS